Stack SpeedyBee F405 V3 BLS 60A FC&ESC

SpeedyBee F405 V3 BLS 60A 30x30 FC&ESC Stack

The SpeedyBee F405 V3 BLS 60A 30x30 FC&ESC Stack is a high-performance integrated stack designed for FPV drones. Combining a flight controller and an electronic speed controller (ESC) in one compact unit, it ensures reliable and efficient operation in demanding flight conditions. Ideal for both professionals and enthusiasts, this stack provides impressive power and performance, making it an essential component for any FPV drone.

Features:

• High-Performance Flight Controller: Equipped with the SpeedyBee F405 V3 flight controller featuring a fast processor and programmable functionality.
• Integrated 60A BLS ESC: Built-in 60A brushless ESC for powerful and efficient flight with support for brushless DC motors.
• Compact Design: The unique design of the stack reduces weight and volume, making it easy to mount on your FPV platform.
• Responsive Control: Provides high-speed response and precise control during flight for exceptional performance.
• Versatile Compatibility: Suitable for various FPV drone types including quadcopters, hexacopters, and other configurations.
• Built-in Protection: Includes protective mechanisms to ensure safety and reliability even in challenging conditions.
• Easy Installation: Simple to install and configure, perfect for both novice and experienced pilots.

Specs:

• Flight Controller:

  • MCU: STM32F405
  • Gyroscope: BMI270
  • USB Port Type: Type-C
  • Barometer: Integrated
  • OSD Chip: AT7456E
  • BLE Bluetooth: Supported
  • WiFi: Not Supported
  • DJI Air Unit Connectivity: 6-pin connector or direct soldering
  • MicroSD Card Slot: Supports up to 4GB SD cards formatted in FAT16 or FAT32
  • Power Input: 3S - 6S LiPo
  • Output 5V: 9x 5V outputs, 2A total current
  • Output 9V: 2x 9V outputs, 2A total current
  • Output 3.3V: For receivers, 500mA
  • Output 4.5V: For GPS modules, 1A
  • UART: 6 sets (UART1, UART2, UART3, UART4, UART5, UART6)
  • I2C: Supported
  • Betaflight LED Panel: Supported
  • Buzzer: Supported
  • Boot Button: Supported
  • RSSI: Supported
  • Smart Port/F.Port: Not Supported
  • Firmware Compatibility: Betaflight, INAV
  • Mounting: 30.5x30.5mm, 4mm hole diameter
  • Size: 41.6mm x 39.4mm x 7.8mm
  • Weight: 9.6g

• ESC:

  • Firmware: BLHeli_S J-H-40
  • Continuous Current: 60A x 4
  • Peak Current: 80A (10s)
  • TVS Diode: Yes
  • External Capacitor: 1000uF Low ESR
  • ESC Protocol: DSHOT300/600
  • Power Input: 3-6S LiPo
  • Output Power: VBAT
  • Current Sensor: Supported
  • Telemetry: Not Supported
  • Mounting: 30.5x30.5mm, 4mm hole diameter
  • Size: 45.6mm x 44mm x 8mm
  • Weight: 23.5g

Kit:

• 1x SpeedyBee F405 V3 Flight Controller
• 1x SpeedyBee BLS 60A 4-in-1 ESC
• 1x 1000uF Low ESR Capacitor
• 5x M3 Nylon Nuts
• 5x M3 Silicone Washers
• 1x M3*8mm Silicone Grommets (for FC)
• 1x M3*8.1mm Silicone Grommets (for ESC)
• 1x SH 1.0mm 8-pin Cable (25mm, FC-ESC connection)
• 5x M3*30mm Hex Screws
• 1x 6-pin DJI Cable (80mm)
• 1x XT60 Power Cable (100mm)