Digital System Walksnail Avatar Kit HD V2

Walksnail Avatar Kit HD V2 digital system for FPV with two antennas. Developed by CADDX to provide high quality video and stable data transmission for quadcopter flights. Using the H.265 code, the camera can stream 4K, 1080P and 720P video with a minimum delay of 22ms, which ensures fast response and precise control. The camera is equipped with a sensor with an original 4:3 aspect ratio, which provides a wide viewing angle of 160°, which is important for viewing during flight. Thanks to the support of Gyroflow technology, the system automatically stabilizes the video, which is especially useful during fast maneuvers. The system is equipped with two antennas with LHCP polarization, which provide a stable signal at a distance of up to 4 km, operating in the frequency range of 5600-6000MHz. The built-in 32GB memory allows you to store HD video without the need for external media. The updated system design provides improved overload protection and increased reliability.

Features:

• Two antennas provide a stable and reliable signal
• Equipped with built-in Gyroflow
• Coverage range up to 4km
• Built-in memory of 32GB
• Supports 4K and 1080P/120fps formats
• Provides a wide viewing angle of 160°
• Low latency of only 22ms

Specs:

Avatar V2 camera

• Image sensor: 1/3.2-Inch 4Mp 4:3sensor
• Resolution: 1080P/60fps; 720P/100fps; 720P/60fps; 1080P/120fps compatibility; 1080P/100fps compatibility;
• Ratio: 4:3native/16:9
• Lens: 2.1mm
• Gyroflow: supported
• Viewing angle: 160°
• Aperture: F2.0
• Shutter: rolling
• Minimum illumination: 0.001Lux
• Cable: 140mm
• Dimensions: 19*19*22mm
• Weight: 7.2g

VTX module Avatar V2

• Frequency: 5725-5850MHz
• Number of channels: 8
• Input power: 6V-25.2V
• Power: (EIRP) FCC - <30dBm; CE - <14dBm; SRRC - <20dBm; Microphone: <25dBm
• 1/O Interface: JST1.0*4 (power input) JST0.8*6 (USB)
• Supported FC system: Betaflight; Inav; Fettec; ArduPilot; Kiss
• OSD: canvas mode
• Average delay: 22 ms
• Mounting holes: 25.5*25.5mm/20*20mm
• Dimensions: 33.5*33.5*10.5mm
• Weight: 17.6g

Antennas of Avatar V2

• Polarization: LHCP
• Frequency: 5600-6000MHz
• Gain: 1.9dBi
• VSWR: ≤1.5
• Connector: IPEX

Kit:

• 1 x Avatar Kit V2 camera
• 1 x Avatar V2 VTX module for 2 antennas
• 2 x Avatar V2 antennas
• 1 x USB extension cable for data transfer
• 1 x 4-pin silicone cable
• 8 x M2*4mm screws
• 4 x M2*5mm screws
• 4 x M2*6mm screws
• 4 x M2*14mm screws
• 4 x M2*5*0.5mm gasket